Ini Spesifikasi Lengkap Motor Listrik ITS

Jakarta - Mejeng di ajang Indonesia International Motor Show (IIMS) 2015, motor garapan mahasiswa Institut Teknologi Sepuluh Nopember (ITS) Surabaya dan PT Garansindo Inter Global resmi diperkenalkan.

Bahkan motor listrik garapan mahasiswa ini sudah diuji. Seperti yang disampaikan 3 mahasiswa ITS, Maxgizca Yunas, Grangsang Sotyaramadhani, hudha Rencana P, di IIMS 2015.

"Iya kemarin sudah diuji sama pak Memet, beliau sangat senang sekali motor ini bisa berfungsi dengan baik. Berarti apa yang kita lakukan sudah benar, meski masih ada permasalahan sedikit," kata Grangsang.

SCROLL TO CONTINUE WITH CONTENT

Meski demikian, Otolovers harus bangga nih dengan motor listrik garapan mahasiswa ITS yang satu ini. "Karena motor Pre Prototipe ini kita kerjakan hanya dalam kurun waktu 2 bulan saja, itu sudah termasuk dengan membuat prototipe ini," tambahnya.

Nah, untuk mengetahui apa saja spesifikasi lengkapnya. Simak yang satu ini Bro.

Sasis

Dimensi (LxWxH) mm: 1.904x678x1.086 mm
Frame : Tubular
Front Suspension: Telescopic
Rear Suspension: Swing Arm with Monoshock
Front Tire: 80/90-14 M/C 40P
Rear Tire: 90/90-14 M/C 46P
Front Brake: Hydraulic Brake Single Piston
Rear Brake Hub Brake

Electric Motor

Rated Power: 5 kW Peak Power (10kW)
Operated Voltage: 96 VDC
Maximum RPM: 3.000 RPM
Rated Torque: 15 Nm
Cooling System: air Cooled
Transmition: Chain/Belt

Motor Controller

Rated Power: 5 kW
Operated Voltage: 96 VDC
Maximum RPM: 3.000 RPM
Rated Current: 50 Ampere
Driver: Half Bridge Mosfet 3 Parallel
Sensor: Hall Effect Sensor
Feature: Programmable Controller, Current Protection, RPM limiter over temperature Protection

Baterai

Nominal Voltage: 97,2 Volt DC with charging Voltage 113,4 VoltDC
Capacity: 1.980 Wh using Lithium Ion Battery
Maximum Discharge: 61,2 Ampere
Charging Time: 1.5 Hours for 60 km/charge

Monitoring System

Processor: Minicomputer 1 Ghz
Display: LCD Touch Screen
Communication: Can Bus Communication up to 1Mbps
Feature: Real Time operating system (RT OS)

Batery Management System

1. Battery Cell Quantity: Support 5-36 Cell Battery
2. Maximum Voltage: Total Pack Voltage 25-180 Volt DC
3. Input and output:

- 2 Digital Input (charge Power Input Signal (12V), Discharge Signal (12 inci).
- 3 Digital Output (charge Control Relay, 2 Contactor Control)
- 1 PWM output to Control Fan

4. Balancing: Self Current Balancing up to 200mA Measure 0.25-5volt/cell batter

5. Resolution: Cell Voltage resolution 1.5 mV.

6. Communication: Using for lithium Ion Battery

7. Feature: Design for lithium ion battery, Temperature Sensing up to 4 Thermistor, discharge and charge curret safety.

(lth/ddn)